Here I show you how I used my KRMx02 CNC to make a sign for my shooting deck.
KRMx02 Milling Enclosure panels for the Universal PID Temperature Controller
Here I show you how I made the panels for this enclosure using the KRMx02 CNC Router.
Reloading Tray
Here I show you how I made some custom reloading trays.
The write-up is located over on my Bread and Ammo site.
KRMx02 Controller Upgrade
Here I show you how to upgrade your KRMx02 to a UC300ETH controller.
CNC Plant Hanger
Here I use my CNC make some plant hangers. Free drawing files available.
Add an Automatic Cooling Fan to the G540.
If your G540 is running too hot, this upgrade is for you.
Searching for Low Latency
Looking into lowering plasma cutting latency.
Guides for a 3 in 1 Shear, Press, Roller
Some simple guides I made for my press break and shear.
DIY Vacuum Fixture
Here I show you how I made this vacuum fixture.
Inexpensive CNC Pendant
Here I add an inexpensive pendant to my KRMx02.
Plasma Torch Height Control Experiments
Here I hookup, configure, and test various torch height control systems.
CNC Construction Set Homing Switches
Here I show you how to add some homing switches to your CNCCS build.
Using a Drag Knife
See how I attach and setup a drag knife.
Updated 12/1/2019
CNC Construction Set Rotary Plasma Experiment
In this video I do an experiment with my harmonic rotary drive and my CNC Construction Set plasma cutter.
Your First Welder
Looking for your first welder? Here is a little bit of my welder history. Maybe it will help.